[TowerTalk] coaxial for loops inside shack

[Jorge Diez - CX6VM]

Hello Jim,

YES, the setup is for Multi Single, Multi Two and SO2R, so I need something
very good.

Thanks,
Jorge
CX6VM/CW5W


-----Mensaje original-----
De: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] En nombre de Jim Brown
Enviado el: Miércoles, 22 de Febrero de 2012 05:15 a.m.
Para: towertalk at contesting.com
Asunto: Re: [TowerTalk] coaxial for loops inside shack

On 2/21/2012 2:27 PM, Gene Fuller wrote:
> How much power/SWR will RG-8X  handle

POWER is not the only issue. SHIELDING can matter FAR more than power if 
you are doing a multi-transmitter operation.  Jorge -- are you doing 
more than one transmitter -- SO2R or multi-two?  If you are, using 
bigger coax with a very good shield can reduce interference between 
stations. All of my feedlines are either Heliax, CATV hard line, Belden 
8213 (RG11), Belden 8237 (RG8), or a Commscope cable that's slightly 
better than LMR400.

73, Jim K9YC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
-----
Se certifico que el correo no contiene virus.
Comprobada por AVG - www.avg.es
Version: 2012.0.1913 / Base de datos de virus: 2113/4823 - Fecha de la
version: 21/02/2012