[TowerTalk] Sealing coax connectors
David Robbins
k1ttt at verizon.net
Tue Jan 17 09:27:21 PST 2012
cheaper, simpler, works fine here, but we only had 50" of rain last year.... take handful of duct seal, mold around connectors and over coax, wrap with two layers of cheap tape just to squeeze it in place and out of the sun. same removal method, split the tape and pull apart, usually most of the duct seal sticks to the tape and the connector is relatively clean. i prefer this to liquid tape or other stuff like that up towers since there is nothing to spill and no time to wait for drying.
Jan 17, 2012 12:18:49 PM, Cqtestk4xs at aol.com wrote:
Simple, and it worked out on the wet side of the Big Island (KH6) where we
got 190 inches in 2009.
Wrap with good quality electrical tape, coat with liquid tape. Wrap
again, and coat again. Cheap effective and just split the taped connection with
a utility knife when you want to take it apart.
Bill K4XS/KH7XS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list