[TowerTalk] Aluminum element wall thickness

[Doug Scribner]

I just finished a 2 element 30 meter yagi. Although I used OnlineMetals for 
some pieces, I found the best price and selection for element tubing at DX 
Engineering.

http://www.dxengineering.com/search/department/rigid-tubing/product-line/dx-engineering-aluminum-tubing?autoview=SKU

Doug - K1ZO

----- Original Message ----- 
From: "Tim Jellison" <w3yq at hotmail.com>
To: <towertalk at contesting.com>
Sent: Sunday, July 15, 2012 12:23 PM
Subject: Re: [TowerTalk] Aluminum element wall thickness


>
> Steve,  I'm not sure how 'local' this is to you.  I bought some tubing 
> from these guys a couple of months ago (had it shipped to me) and they did 
> a good job.  I'd use them again.  I think they're in Seattle.
>
> http://www.onlinemetals.com/
>
> 73,
>
> Tim KL7WV
>
>>
>> Message: 10
>> Date: Sun, 15 Jul 2012 10:34:58 -0400 (EDT)
>> From: K7LXC at aol.com
>> Subject: Re: [TowerTalk] Aluminum element wall thickness
>> To: towertalk at contesting.com
>> Message-ID: <13db5.7b5d6e54.3d342f12 at aol.com>
>> Content-Type: text/plain; charset="US-ASCII"
>>
>> Howdy, TowerTalkians --
>>
>> Tnx to the many folks that confirmed the 0.058" wall thickness. Now if
>> I can just get some locally - hi.
>>
>> Cheers,
>> Steve K7LXC
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>