[TowerTalk] W51 TRIAX cables for motorized version

[lkeller73 at roadrunner.com]

Hi, Barry

Over the years when I've replaced the hoist cables on various crank-ups, I've taken the tower down and removed the cables and physically took them to a local rigging supply house and told them "replace these with new"....never took more than 1/2 hour for them to replicate/fabricate and prices were reasonable.

Dunno what you have locally there in IL but I use Hanes Supply which has HQ here in Buffalo, NY area with branches in Rochester, Albany, Watertown and Charleston, SC. 

www.hanessupply.com

Can't imagine you don't have something similar near you.

73 & Good Luck with the project.

Lonnie
WA2AOG/W2RR

+++++++++++



---- Barry J Cohen <n2bj at comcast.net> wrote: 
> 
> I have the motorized version that appears to have 2 cables 
> 1 cable attaches to the top 2 sections of the 3 section tower . This cable
> appears to have 2 NicoPress fittings, the other cable has 1 NicroPress
> fitting and the other wraps to the motorized winch fixture.
> 
> Does anyone know where I can get these 2 cables premade up or the dimensions
> and specs on the cables.
> 
> You can contact me direct at n2bj at comcast.com or
> 815-483-4191 cell or my office number 815-462-0921 during the day 
> 
> Thanks
> Barry
> N2BJ
> 
> www.n2bj.com
> 
> 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk