[TowerTalk] Know a Mfr. Source of Alum Tubing ?

[Stephen Davis]

Joe, thanks so much.  We used to have a Ryerson in NH, not too far from me but they went out of biz and I thought that was it with them.  And for some reason did not see them in my searches.   
  Tnx again, much appreciated, Steve  K1PEK

 
On Mar 26, 2012, at 5:02 PM, Joe Giacobello, K2XX wrote:

> Steve, for the quantity you want, I recommend Ryerson.  Ryerson's on-line catalog is available here: http://www.ryerson.com/stocklist/t-1697-Aluminum-Tubing-Round-Drawn-6061-6063.html.  I believe that they have distributors throughout the USA.  I bought 24' lengths of 0.25" wall tubing for a 160M vertical installation at their Greensboro, NC location.  If you have a properly sized truck, you'll save money by picking it up yourself.
> 
> 73, Joe
> K2XX
> 
> On 3/26/2012 3:49 PM, Stephen Davis wrote:
>> Hi,  I potentially have a large project and need around 575 lbs of varied OD, drawn, not extruded, alum. tubing.  Seeking a mfr. vs. a distributor.
>> Googling has not rendered much but for extruded.   Tnx for the help,  Steve, K1PEK
>> 
>> _______________________________________________
>> 
>> 
>> 
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>> 
>> 
>