[TowerTalk] Gin Pole for Rohn 55G

[Wayne Kline]

I have both the Rohn EF2545 abd the HD WB0W and would be vary leary of using the EF2545 on  Rohn 55 because of the larger leg Dia.there are some fabricated gin pole brackets on Ebay but i am not sure if they have the ability as the WB0W unit to extend/adjust the outer clamp position  ?
 
Wayne W3EA 
 
> Date: Tue, 27 Mar 2012 11:35:23 -0700
> From: kk9a at bellsouth.net
> To: towertalk at contesting.com
> CC: towertest at infinichron.com
> Subject: Re: [TowerTalk] Gin Pole for Rohn 55G
> 
> That is a good question!  I have used a Rohn EF2545 gin pole for Rohn 55G 
> however I would not recommend doing this.
>  
> John KK9A / P40A
>  
>  
> To:   <towertalk at contesting.com>
> Subject:[TowerTalk] Gin Pole for Rohn 55G
> From:"VE1DT" 
> Reply-to:   towertest at infinichron.com
> Date:Tue, 27 Mar 2012 08:13:50 -0300
>  
> I am going to be putting up a Rohn 55G tower but I am having difficulty
> finding a suitable gin pole.
>  
> I have investigated the WB0W version, but there are availability problems
> from that source. The Rohn product and EBay offerings appear to only be
> suitable for  25G and 45G. Are there other sources of gin poles suitable for
> 55G that people have had success with?
>  
> --
> Gerald Boutin, VE1DT
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk