[TowerTalk] WHICH ROTOR TO USE?

[Bob Gibson]

That's a good question..worth a phone call..its just to see a US company inter the market!


Bob Gibson W5RG

From: Doug Renwick <ve5ra at sasktel.net>
To: 'Jon Pearl - W4ABC' <jonpearl at tampabay.rr.com>; 'Bob Gibson' <w5rg at yahoo.com> 
Cc: TowerTalk at contesting.com 
Sent: Saturday, May 5, 2012 8:51 PM
Subject: RE: [TowerTalk] WHICH ROTOR TO USE?

My observations of this rotor:

1.  That's a pretty small mast clamp.  You would need a different mast clamp
for every different OD mast.

2.  How is the flange attached to the out put shaft?  That could be the weak
link.

3.  Looks like it needs 4 hands to install up on the tower.

Doug

Logic, reason and science don't define everything in this world. 

>-----Original Message-----
>
>I was just going to make that suggestion, Bob...
>
>http://www.cytorq.com/
>
>
>
>73,
>
>
>Jon Pearl - W4ABC
>www.w4abc.com
>
>
>On 5/5/2012 2:15 PM, Bob Gibson wrote:
>> There is a new rotor on the market now that looks pretty good..check
>out..oytorq.com..I use a orion 2800 and a green heron to turn a 4 ele 40
and a 4 ele
>steppir..no problem here in fl. 73s Bob
>>
>>
>> Bob Gibson W5RG