[TowerTalk] Yaesu 800DXA Followup

[Mark Adams]

Thanks for the replies gentlemen. I am going to order connectors. In the
meantime, I'll get some DC to pins 4-5 with the rotor on the bench and see
if it turns OK.

Seems like I rarely have problems that are obvious like a severed wire or
busted gears or a blown diode. Every solution turns out to be the least
obvious and cannot be diagnosed easily.

73,
Mark K2QO
K2 #543
FN03ra



On Tue, Oct 9, 2012 at 7:28 AM, Doug Scribner <dscribner at myfairpoint.net>wrote:

> Mark,
>
> Yaesu connectors here...
>
> http://www.eham.net/**classifieds/detail/387957<http://www.eham.net/classifieds/detail/387957>
>
> Doug - K1ZO
>
> ----- Original Message ----- From: "Mark Adams" <msadams60 at gmail.com>
> To: <towertalk at contesting.com>
> Sent: Monday, October 08, 2012 11:13 PM
> Subject: [TowerTalk] Yaesu 800DXA Followup
>
>
>  Hi Gang,
>>
>> In July I asked for help with my rotor issues and my initial notes are
>> below. Today I finally lowered the tower, removed the mast and stack to see
>> if anything was binding.
>>
>