[TowerTalk] isolation and SWR

[Pete Smith N4ZR]

Just now, I was fiddling with my homebrew 80m array switchbox.  I have 
only two dipoles on it at the moment, both reasonably well matched.  
Accidentally I switched to one of the unterminated positions, and got an 
SWR on the order of 4.5:1 (feeding the dipole switchbox through my 
Ameritron RCS-10.  By comparison, if I disconnect the feedline inside 
the shack, the SWR is in excess of 25:1, and if I switch the RCS-10 to 
an unused position, I get 4.5:1.

Is there even an approximate relationship between these various SWR 
numbers and the degree of isolation afforded by the two switchboxes?  
And probably an even dumber question.  If you have two devices in line 
and each has (say) 30 dB isolation between a line in use and an unused 
one, both of which pass through them both, is the resulting isolation 27 
Db?  Some other number?

Be gentle - I was a liberal arts major.

-- 
73, Pete N4ZR
The World Contest Station Database, at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000