[TowerTalk] Hardline - PL-259

[K8RI]

On 9/25/2012 12:00 AM, Hans Hammarquist wrote:
> I have s.k. TV-hard-line (70 ohms) coax that I am planning to use for my set-up. My idea was to attach some bulk-head SO-239 to the cable with the help of brass oil compression coupling (I'm told that's the way to go.) I measured the cable and the outside of the aluminium shield is 1/2 inch (give or take a few .001". The bulk-head connector seems more like 9/16" and I don't know if there is such an animal as 1/2 - 9/16" adapter around the oil couplings. (The inner conductor seems to be wide enough to fit, if I do "some magic with the inner connector.)
>
>
> Can I turn down the thread on a bulkhead from 9/16" to 1/2" or will that give too little material left for strength? Is there some plumbing thread that (almost) fit the SO-239 thread? Any suggestions?
>
>
> As usual, I am open for ideas. (E.g. I will move my shack to the tower so I don't need any catenary between my tower and my shack.)
>

Take a look at http://www.rogerhalstead.com/ham_files/conn.htm  It 
worked for me.

73

Roger (K8RI)


>
> Hans -N2JFS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>