[TowerTalk] Bulkhead adaptors

[Steve Hunt]

Try Mouser UK:

uk.mouser.com
Part#  530-CP-AD207 @ £3.92 for 10 off

Detail here:
http://uk.mouser.com/ProductDetail/AIM-Cambridge-Emerson-Connectivity-Solutions/CP-AD207/?qs=sGAEpiMZZMvKcUa6gL0RXLLIz1iZD7Hf7iQuMPJ5Lt0%3d

Steve G3TXQ



On 03/04/2013 14:02, John E. Cleeve wrote:
> Good afternoon,
>
> I am in process of planning cable runs from the tower to the shack, with
> the cable screens bonded to a ground plate at the tower base and again at
> an external grounded copper plate mounted on a short post prior to entry
> into the shack.
>
> I recall that in the past, PL259 back to back female bulkhead adaptors
> were available with a large hexagonal flange as an integral part of their
> body manufacture, you simply drilled a hole in a bulkhead, passed the
> adaptor through, up to the fix hexagonal flange, and placed a suitably
> sized nut on the thread, on the other side of the bulkhead, and tightened
> it up.
>
> I have made enquiries, looked through catalogues, lists etc. but such
> adaptors appear to be no longer available, certainly in the UK. I have
> need of 12 such bulkhead adaptors, if anyone knows the manufacturer or can
> point me to a source.
>
>
> 73, John G3JVC/GM3JVC.
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>