[TowerTalk] Mast vs. R45G part deux

[K1TTT]

No, I tried that on the ground to see if it was a viable way to put a mast
into a tower.  if you don't have a heavy enough and long enough gin pole to
pull it out the top just lower it down inside to the bottom and when you
have 2 sections left just take them off the base and lay them down with the
mast inside.

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net


-----Original Message-----
From: K7LXC at aol.com [mailto:K7LXC at aol.com] 
Sent: Friday, April 19, 2013 22:26
To: towertalk at contesting.com
Subject: [TowerTalk] Mast vs. R45G part deux

Howdy, TowerTalkians --
 
    Tnx for your inputs but I think I need to  describe what I want to do in
more detail.
 
    There is a heavy 20' mast sticking out of  the top of a pointy top 45G. 
What I want to know is if by lowering the mast down  thru the middle of the
tower, if at some point you can exit the mast thru the  face of a tower
section?  I haven't tried it and doubt if it could be done  but I wanted to
see if someone in the group has done it or attempted it.  Tnx.
 
Cheers,
Steve    K7LXC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk