[TowerTalk] Triex WT51

[Ray Benny]

It is always best to "control" the fall with a lowering device, crane or
whatever. I have dropped towers onto a 3 - 4 stack of large used tires.
They will take up most of the fall shock, but one time the tower developed
a very small warp near the top of the outer section. It was not enought to
cause a problem, but still did not like it being there.

GL,

Ray,
N6VR.

On Sun, Apr 21, 2013 at 6:16 PM, EZ Rhino <EZRhino at fastmovers.biz> wrote:

> We recently picked up a UST TMM438 (I think) with four guys...just put
> some 2x4's through the tower at the front and back, using them as handles
> and just walked it off the trailer.  It wasn't hard at all.  I think it
> weighs around 400lb, give or take a little.
>
> Chris
> KF7P
>
>
> On Apr 21, 2013, at 19:12 , Jon Pearl - W4ABC wrote:
>
> And to that, I might add that I've had good success with making rollers
> out of larger diameter schedule 40 PVC pipe.  Cut to 3' lengths and
> continuously tossed in front of the tower, even if you hit a spot where
> where the roller doesn't roll, the tower easily slides over the top of the
> PVC leaving it behind to pick up and throw in front of the tower again.
>
>
>
> 73,
>
>
> Jon Pearl - W4ABC
> www.w4abc.com
>
>
>
> On 4/21/2013 8:46 PM, Mike wrote:
> > I moved my LM-470 with two movers dollies and a few sheets of ply-wood
> from
> > the street to my location at the back of the house over grass, it was
> > surprising easy to do with two people.  Lifted it onto the Dollies with a
> > small engine crane.
> >
> > Mike/K6BR
> >
> >
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>