[TowerTalk] Hose Clamps

[Bill Parry]

Skips suggestion is good one. After buying a couple of Force 12 antennas I
have decided to rivet all the element connections on all my antennas. I
never have to worry if the connections are going to slip.  It is real easy
to drill them out if necessary to change a setting or replace part of an
element.

Bill W5VX

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
KJ6Y at aol.com
Sent: Sunday, January 27, 2013 2:26 PM
To: jerryw6uv at gmail.com; towertalk at contesting.com
Subject: Re: [TowerTalk] Hose Clamps

After tightening the clamp, you can rivet the joint. I have done that even
on the pre MFJ Hygains.
 
 
 
 
Skip,  KJ6Y
_Communications Service  Co_ (http://www.communicationsserviceco.com/) 
818-887-3569

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk