[TowerTalk] static

[Chuck Sudds]

Recently replace my T2X with an Alpha Spid and put utility trailer 
connectors on each end of the cables.  When I hooked it all up, no 
rotation!  Checked and rechecked everything and come to find out, the 
utility trailers were BOTH bad!  They were a Chinese brand sold by NAPA. 
Wired everything up without the connectors and it all worked as it was 
supposed to!  If you do decide to go this route, be sure to check and 
recheck those connectors BEFORE installing them. It's a lot easier to 
troubleshoot this type of a problem on the ground rather than 96 feet up 
on a tower!  Good luck!

73,
Chuck  KØTVD
WWW.DXHAM.NET

>> While that sounds like a good idea, I'd like to suggest either a 
>> multi-pin Cinch-Jones connector or a connector for a utility trailer. 
>> The Pwr-Poles will be hard to keep "straight" as far as 1-1, 2-2, 
>> etc. With the others, it's one plug-up. they are polorized, and 
>> you're done.
>> K9WN Jake