[TowerTalk] Ground rod
K8RI
K8RI-on-TowerTalk at tm.net
Tue Jul 16 20:59:15 EDT 2013
On 7/16/2013 8:56 PM, Grant Saviers wrote:
> Check out Ufer grounds. If you insure your base rebar is well tied and
> the tower anchor bolts electrically tie to the rebar (I welded small
> rebar connections to the anchor bolts, but several good tight wire ties
> would also work) then you have an excellent start on grounding the
> tower. Additional ground rods should be spaced away from the concrete,
> usually by the length of the ground rod. Much is written here about how
> many and how to tie the ground rods together, search the archives.
The ground rod and rebar should not exit the bottom of the concrete,
73
Roger (K8RI)
>
> Grant KZ1W
>
> On 7/16/2013 5:45 PM, les wrote:
>> I am putting up a new tower and was wondering if the ground rod for it
>> can go through the concrete in the base or is it better to place it
>> outside the concrete base?
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list