[TowerTalk] Vertical and guys question

[John]

Jerry,

If you have raw tubing with no internal parts, I would consider drilling 
and inserting 3/4 in or 1 in metal screw eyes.  It that is not possible, 
three half-hitches with the bitter end also brought around and tied to 
the body of the line would also work. If you are concerned about the 
line slipping, clamp  the 3 or 4 lines to the antenna with circle 
clamps.  They can be completely opened so you can avoid taking the 
antenna apart to mount the circle clamps.  For the average antenna, you 
probably want to mount your lines at least up about 3/4 of the way to 
the top.

Cheers,

John  /  WA1JG


On 7/29/2013 8:19 AM, Gerard Jendraszkiewicz wrote:
> Hello,
>
> I have a vertical made from tubing and need to attach guys to it. The 
> guy material is small phillystran. One thought is to make some guy 
> rings to go around the tubing ? The vertical is a old Titanex V160. 
> The tubing goes from 80 mm to 73mm / 73mm to 60mm then 40, 30 22, 18 
> mm. The total height will be 32 mh (105 ft). The 80 and 73 mm tubing 
> are 6m long.
>
> Thanks for your input !
>
> 73, Jerry, KE9I
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>