[TowerTalk] Coax and control lines in same PVC (Steve Jones)-Option

[Ian White]

>-----Original Message-----
>From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
>Ian White
>Sent: 18 June 2013 09:02
>To: towertalk at contesting.com
>Subject: Re: [TowerTalk] Coax and control lines in same PVC (Steve
Jones)-
>Option
>
>For remote control of a Beverage antenna selector, N4ZR has had good
>success with sending the 300MHz control signals out along the same coax
>that carries the incoming 160/80m signals. That same coax also carries
DC
>power to the preamps. I believe that Pete documented this in NCJ.
>

National Contest Journal, Volume 40. Number 3, May/June 2012, page 6: 'A
"Wired-Wireless" Remote Receive Antenna Switch' by Pete Smith, N4ZR.

 73 from Ian GM3SEK