[TowerTalk] US Tower HDX-689 Sheave replacement
Jim Thomson
jim.thom at telus.net
Tue Mar 12 03:48:31 EDT 2013
US Tower HDX-689 Sheave replacement
The UST HD-689 uses aprx 22 pulleys in total. All are aluminum, with an internal bearing.
If the bearing is trashed, the soft aluminum pulley is probably trashed too. No point in replacing
a bearing, and still use the trashed al pulley. If the pulley is worm down, you are better off to
just replace both the pulley and bearing.
I think it was dino that was telling me last year that each pulley/bearing assy was aprx $150.00 EACH.
The story I got was that UST makes the aluminum pulleys in house, and presses the bearings into place too.
You might want to keep any debris/gunk off of any of the lift cables, or it will get ground into the soft aluminum
pulleys. I’d keep the cables well lubricated with that gunk that k7lxc recommends to use. The local shipyards
use the same stuff..and they buy it in 55 gallon drums.
Jim VERF
More information about the TowerTalk
mailing list