[TowerTalk] UHF right angle connectors

[Bryan Swadener]

Hi Wayne,
 
1) I'm not the one seeking the parts. You should've replied to Jorge CX6VM, not me.
2) I buy UHF fittings from DX Engineering because I know their stuff is top shelf.
 
vy 73,
Bryan WA7PRC


________________________________
From: Wayne Kline <w3ea at hotmail.com>
To: Bryan Swadener <bswadener at yahoo.com>; "towertalk at contesting.com" <towertalk at contesting.com> 
Sent: Wednesday, November 6, 2013 6:00 AM
Subject: RE: [TowerTalk] UHF right angle connectors



  I don't always need a right angle connector but when I do I use Amphenol .,
 
http://www.therfc.com/uhf.htm   there [sic] not cheap but they are not the springs as the low cost ones use to achieve the 90 degree
angle .
 
Wayne W3EA
 

> Date: Tue, 5 Nov 2013 18:41:37 -0800
> From: bswadener at yahoo.com
> To: towertalk at contesting.com
> Subject: Re: [TowerTalk] UHF right angle connectors
> 
> Hola Jorge,
>  
> Amphenol RF (http://www.amphenolrf.com/) shows 3 possibilities
> (2 connectors + 1 adapter)..
>  
> Plugs: pn 83-67 and 83-59
> M-F Right-Angle Adapter: pn 83-1AP
>  
> Unless space is cramped, I'd probably just use a straight plug + adapter.
>  
> vy 73,
> Bryan WA7PRC
> 
> 
> ________________________________
> Date: Tue, 5 Nov 2013 23:15:08 -0200
> From: Jorge Diez - CX6VM
> Subject: [TowerTalk] UHF right angle connectors
> 
> Do you know the part number and where to find AMPHENOL UHF MALE RIGHT ANGLE
> CONNECTORS?
> 
> Looking for the right angle version of the 83-1SP
> 
> Thanks!
> 
> Jorge
> 
> CX6VM/CW5W