[TowerTalk] Filled Heat Shrink Source

[Jim W7RY]

The RFC (The RF Connection) has the stuff in stock.

73
Jim W7RY

On 11/12/2013 4:02 PM, Richard Solomon wrote:
> That's the stuff ... thanks for the lead.
>
> There's so many different types out there that I would rather use what
> folks use than re-invent the wheel.
>
> Tnx es 73, Dick, W1KSZ
>
>
> On Tue, Nov 12, 2013 at 4:54 PM, Grant Saviers <grants2 at pacbell.net> wrote:
>
>> If you want adhesive lined heat shrink, almost all component suppliers
>> stock it - Mouser, Digi-Key, Jameco, Newark.  I found some 5/8 4:1 at a
>> good price at
>> http://www.mcmelectronics.com/product/21-10990  took a while to get it
>> though, might be in stock now there, it wasn't available from the others.
>>
>> 5/8 4:1 shrinks enough for RG58/59/8X/142.  3/4" is fine for RG8 sizes.
>>
>> Grant KZ1W
>>
>>
>>
>> On 11/12/2013 3:18 PM, Richard Solomon wrote:
>>
>>> Where do folks get there tubing from ? I need several sizes.
>>>
>>> Thanks, Dick, W1KSZ
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>