[TowerTalk] Grips

[David Robbins]

The grips go with the type and diameter of the guy wire not the type of tower.  since rohn towers normally specify 3/16", 1/4", or 5/16" EHS guy wire, there are only 3 types of grips needed to cover a very wide range of tower types and heights.

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net


-----Original Message-----
From: Wilson [mailto:infomet at embarqmail.com] 
Sent: Saturday, October 05, 2013 17:07
To: towertalk
Subject: [TowerTalk] Grips

It’s odd that one grip does 25-65 towers.

http://www.antennapartsoutlet.com/Pages/Products/ROHNPages/BG2142.html

http://www.texastowers.com/bg2142.htm

http://www.ebay.com/itm/ROHN-BG2142-Galvanized-Big-Grip-for-3-16-EHS-Strand-Guy-Wire-Big-Grip-/390598970851

http://www.dxengineering.com/parts/roh-bg2142

http://www.3starinc.com/rohn_316_inch_big_grip_guy_wire_strand_pre-form_dead-end_r-bg2142.html

http://www.hol4g.com/ac/product.aspx?number=ROH-BG2142&p=163750&sc=0

Here’s a red one, also rated to EHS breaking strength, but cheaper, 13.75” long.  The tree people seem to be the only ones giving a length.

http://www.westechrigging.com/tree-grip-dead-end-316.html?utm_source=googlepepla&utm_medium=adwords&id=20047135963&utm_content=pla&gclid=CPOut_aUgLoCFc19Ogodl2kAMQ#.UlBE6I16aSo
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk