[TowerTalk] Connecting Flat Copper to 5/8" Ground Rod

[Jim W7RY]

Do you have a part number?

73
Jim W7RY

On 10/13/2013 6:44 PM, Mark Robinson wrote:
> As another option, I believe that cadweld sells a form designed to 
> work with copper strap and circular copper clad ground rods
>
> Mark N1UK
>
> ----- Original Message ----- From: "Mark Robinson" 
> <markrob at mindspring.com>
> To: "Ray Benny" <rayn6vr at cableone.net>; "TowerTalk" 
> <TowerTalk at contesting.com>
> Sent: Sunday, 13 October, 2013 9:41 PM
> Subject: Re: [TowerTalk] Connecting Flat Copper to 5/8" Ground Rod
>
>
>> I preformed the copper strap around half of the copper clad ground 
>> rod and silver soldered the strap to the rod.
>>
>>
>> Mark N1UK
>>
>>
>>
>> ----- Original Message ----- From: "Ray Benny" <rayn6vr at cableone.net>
>> To: "TowerTalk" <TowerTalk at contesting.com>
>> Sent: Sunday, 13 October, 2013 5:47 PM
>> Subject: [TowerTalk] Connecting Flat Copper to 5/8" Ground Rod
>>
>>
>>> Has anyone come up with a way to connect flat copper straps to 
>>> ground rods?
>>> DXXE sells copper clamps w/ hardware, but at $35 a pop, I hoping 
>>> that there
>>> is a more reasonable way to get the job done.
>>>
>>> My copper strap is 2" wide, by 6ft, and about 18 ga, but not sure.
>>>
>>> Tnx,
>>>
>>> Ray,
>>> N6VR
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk 
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>