[TowerTalk] TowerTalk Digest, Vol 136, Issue 10

[john at kk9a.com]

One common problem with Yaesu rotators is water in the connector boot.  I
would check this connection first.

John KK9A


To:	towertalk at contesting.com
Subject:	 Re: [TowerTalk] TowerTalk Digest, Vol 136, Issue 10
From:	 ftravanty <W9JCC at wi.rr.com>
Date:	 Fri, 04 Apr 2014 11:48:49 -0500

I plan on taking my Yaesu G-2800SDX rotor down this summer to replace an
intermittent position feedback pot, that has been acting up for the last
three years. It's been in service for over 15 years with low usage. I
suspect moisture possibly thaw &freezing in the winter. Couple of
questions. Anyone have any pot failure history with the G-2800 series
rotor? Anyone have factory setup instructions for re assembly , and is it
worth trying to shield the pot shaft bushing from water in this model
rotor,?
Thanks,
Frank W9JCC