[TowerTalk] Long Cable for Yaesu Rotor

[Jim Brown]

On 4/20/2014 10:14 AM, Larry wrote:
> FWIW, I used 450 feet on a KenPro KR2000 (KenPro sold their rotator 
> line to Yaesu and the KR2000 is the same as G2800(?)) for years 
> without problems. I used the stuff with a pair of #14 conductors.

Yes. Ohm's law still works. :)  I have a long run to a Yaesu rotor 
(about 350 ft) that is #14 house wire for the pair that runs the motor, 
and smaller conductors for the position sensing resistor.

73, Jim K9YC