[TowerTalk] KT36 Balun

[Jim W7RY]

I cant find the M2 balun on their site.
73
Jim W7RY


-----Original Message----- 
From: Marsh Stewart
Sent: Sunday, April 27, 2014 8:36 AM
To: 'Jim W7RY' ; towertalk at contesting.com
Subject: RE: [TowerTalk] KT36 Balun

I'm rebuilding a KT34XA and installing the KT36 upgrade kit plus new style
boom to element clamps. Right now I plan to use the new 3KW balun I got from
M2. Is there something better out there I should consider? I believe Balun
Designs makes excellent high quality products that work.

Marsh, KA5M


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Jim
W7RY
Sent: Saturday, April 26, 2014 11:00 PM
To: Jim W7RY; towertalk at contesting.com
Subject: Re: [TowerTalk] KT36 Balun

The KT-36 is 200 ohms feed point impedance. Not 50 ohms. I though I better
clarify.

73

Jim W7RY


-----Original Message----- 
From: Jim W7RY
Sent: Saturday, April 26, 2014 7:43 PM
To: towertalk at contesting.com
Subject: [TowerTalk] KT36 Balun

Which balun do you recommend for the M2 KT36?  A voltage balun or a current
balun? I run 1500 watts during RTTY contests.

I'm planning on winding my own. I have Jerry Sevick's book on building them.

Thanks!
73
Jim W7RY
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk