[TowerTalk] Trailer Hitch Electrical Connectors for Rotator Cable

[Don]

I use a good old fashioned 6 pin trailer connector set, one on the rotator 
tail and the other on the cable. All pins and holes well covered with 
CorrisionBlock. And I live on the ocean, been up since 2003 and only finally 
corroded inside this year (should have put some seal where the wires enter 
the rubber block). Available at any auto parts store usually. Made for the 
wx!!

Don W7WLL

-----Original Message----- 
From: W3YY
Sent: Wednesday, August 20, 2014 4:27 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Trailer Hitch Electrical Connectors for Rotator Cable

Does anyone have any recommendations for trailer hitch electrical connectors
that work well as rotator control cable connectors?  I would like to have at
least 5 conductors in the connector, if possible.



73, Bob - W3YY





_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk