[TowerTalk] Running feed line and rotor cable together?

[Paul Braiman]

Greetings Fellow Towertalkians-

Just wondering if anyone has any recommendations regarding the routing of a LMR400 UF coax feed line alongside a 4-conductor rotor control cable, and a control cable for a soon-to-be-completed SteppIR DB-18 antenna. My intent is to gently tie wrap the 3 cables together using UV-rated outdoor ties, then leave the appropriate loops and slack so I can raise and lower the tower. The Orion 2800 rotor is already mounted, tested with a mast that’s ready to receive the antenna. 

Anything else I should be mindful of? All cables are shielded and will be tied to a common earth ground. I'll be feeding the antenna with 100 W max.

If not tied directly next to each other, what would be a good separation distance for the coax and the other two?

Your collective wisdom is greatly appreciated by this relative newbie. :)

73,

-Paul, W2PIR