[TowerTalk] Multi-Op Station Interconnect coax type?

[Peter Voelpel]

I use mostly RG-214 but also short length of RG142 or longer runs of
SCF12-50, always depending on my surplus sources what is available for free
or some beer.

73
Peter

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Rich
Hallman - N7TR
Sent: Freitag, 26. Dezember 2014 16:35
To: towertalk at contesting.com
Subject: [TowerTalk] Multi-Op Station Interconnect coax type?

Im re-cabling a 4 transmitter station and am looking for feedback on what
you are using for interconnect coax after your amplifiers?  I'm using double
shielded RG8X for the low power connections to the low power bandpass
filters then to the amplifier inputs.  Looking to see if good quality RG213
/ RG8 (95-98% shield) is ok past the amps to the high power 4O3A filters or
should I use something like LMR400 / BuryFlex for those connections to keep
down the potential inter-station interference?

Thanks...
Rich

Rich N7TR
ex KI3V, N3AMK, WB3JOV
http://www.qrz.com/db/N7TR
Telnet: dxc.n7tr.com N7TR DXCluster


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk