[TowerTalk] 40/80 stub

[Dave Hachadorian]

I have done this at 100 watts, with a dinky little panel-mounted 
toggle switch.  You could probably use a wall switch or a relay 
at high power.  I have used a 3-way wall switch to make a 
2-position antenna switch for high power.

Dave Hachadorian, K6LL
Yuma, AZ


-----Original Message----- 
From: Tom Osborne
Sent: Monday, December 29, 2014 2:23 PM
To: towertalk at contesting.com
Subject: [TowerTalk] 40/80 stub

Hi All

It is possible to make a ~23' stub with a switch in the end to 
open and
short for 20/40.  Can you do this with 40/80 by making an 80 
meter stub
and put a switch on the end like the 20/40? I've never seen this 
done.

I have a 40/80 elevated vertical I'd like to put a stub on. 
Thanks and 73
Tom W7WHY
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk