[TowerTalk] Drill motor
Richard (Rick) Karlquist
richard at karlquist.com
Mon Feb 17 22:34:32 EST 2014
On 2/17/2014 6:04 PM, Bill Erickson wrote:
> I removed the hand crank and reinstalled the nut that holds the crank onto
> the shaft of the winch.
What prevents the nut from unscrewing when you drive it CCW?
> I cut off the socket end of a 3 inch long 1/2 inch drive extension. I
> milled 3 flats on the cut off end of the extension. This could also be done
> by grinding, it just wouldn't look quite as professional.
You know you can buy a hex to square drive adapter for a few bucks.
You can also buy hex to socket adapters for the particular nut you have.
I have many of both kinds in my tool box. Why make your own?
>
> Bill N6MXU
Rick N6RK
More information about the TowerTalk
mailing list