[TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam
n8de at thepoint.net
n8de at thepoint.net
Wed Jul 2 10:51:02 EDT 2014
Isn't the match used on the Telrex antennas a T-Match?
That would require a 4:1 balun (Telrex used a coaxial 1/2-wave balun).
73
Don
N8DE
Quoting James Archer <James.Archer at erm.com>:
> Tuning a Telrex 10M523 (Telrex 5 element beam on 23 foot boom)
>
> After several days of work on the ground working with the matching
> system and trying multiple combinations of driven element length to
> the Telrex match position-the best we can get is an SWR of 2.3 at
> 28.500. We are using an MFJ tuner through a 4 foot piece of coax to
> the antenna. Antenna has a tuned matching stub set for 28.500.
>
> We have followed exactly the specifications from the 5 page Telrex
> instructions that are beautifully illustrated.
>
> This is a wonderfully built antenna and we are very keen to get this
> tuned up right and in the air working!
>
> Anyone have any golden words of advice, we are of course looking to
> get the SWR down below 1.5:1 at 28.500
>
> Thanks in advance for any help you can provide. Replies to N3ZS at
> james.archer at erm.com
>
>
>
> ________________________________
>
> This message contains information which may be confidential,
> proprietary, privileged, or otherwise protected by law from
> disclosure or use by a third party. If you have received this
> message in error, please contact us immediately and take the steps
> necessary to delete the message completely from your computer
> system. Thank you.
>
> Please visit ERM's web site: http://www.erm.com
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
More information about the TowerTalk
mailing list