[TowerTalk] HG70HD Lift Cable Replacement Knoxville TN

[Don]

Bob,

Assume you mean both cables. It is not a hard job  and I'm about to do set 
number 3 on my HG70-HD at age 78 (Galvanized cable doesn't last long here on 
the OR coast). A good cable rigging company can properly fabricate the 
cables, should be some in Knoxville area who do this kind of work for the 
construction companies. By the way I also replaced the regular steel pins in 
the pulleys with SS ones and used SS cotters. A local machine shop cut them 
from stock, drilled the holes and chamfered the pin ends for just a few 
bucks.

Don W7WLL

-----Original Message----- 
From: Bob Farkaly
Sent: Friday, July 25, 2014 11:49 AM
To: 'towertalk reflector'
Subject: [TowerTalk] HG70HD Lift Cable Replacement Knoxville TN

I need the lift cable on my HG70HD replaced. Anyone interested in the task?

Bob, K9RHY




Bob Farkaly, K9RHY
4517 Topside Rd
Knoxville, TN 37920-6055
Telephone: 865-573-6322
Mobile: 619-602-2653



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk