[TowerTalk] Utility Pole as Beam Support
W0MU Mike Fatchett
w0mu at w0mu.com
Thu Jun 5 12:33:12 EDT 2014
I guess you have had better luck with government employees than I have.
When I put up my first tower there were zero regulations about it. A
neighbor complained and the county fired off a letter that said I must
take it down with absolutely no basis for the claim. So we hired an
attorney at our cost to fight them. They wilted away when they had
ground to stand on. My point is why did they come after me instead of
doing their JOB and researching the situation and telling the neighbor
that my tower was legal.........
Mike W0MU
On 6/5/2014 10:05 AM, Mickey Baker wrote:
> Mike,
>
> I've spent a lot of my career servicing government agencies and spent
> time as director of technology for a county government.
>
> Like any workplace, 20% of the employees do 80% of the work. I don't
> see much difference in the public vs. private sector. Most government
> employees realize that their position is contingent upon providing
> customer service. Adverse interaction with citizens can dramatically
> affect one's career - but so can approval of structures that don't
> meet code requirements.
>
> Generally, denial of permits that are of questionable merit is exactly
> what the public wants. It is up to us, amateurs, the federally
> licensed "experts", to bring the facts AND the law to light to the
> government employees. If you don't do a good job with that, you're
> going to get denied - every time. Typically, they're not engineers and
> not lawyers, so they are not going to allow something unless there's
> sufficient data that they should.
>
> If you go in to the building department, fill out a form and submit it
> without appropriate documentation, you're almost certain to be
> rejected. Be happy that your next door neighbor can't build a pig barn
> or explosives factory by filling out a form and yelling about their
> property rights. Complaining loudly happens more frequently than you'd
> imagine and it does nothing to advance your cause.
>
> Before I got my permit for my tower in an urban neighborhood, I was
> denied three times for three different reasons. Each time, a cordial
> meeting with a different level of government official ended with an
> pass through one gate.
>
> Be nice, be respectful - typically government employees are underpaid
> as compared to the private sector.
>
> Get your ducks in a row, find out what you need, appear prepared,
> contrite and with proof of the legality and safety of your project and
> you'll get a permit.
>
> Fred Hopengarten has written a great guide to doing exactly that. If
> you're considering putting up an antenna support, check out:
> http://www.antennazoning.com/main/page_amateur_radio_main_menu.html
>
> And buy his book with the first $50 of your project funds. It will be
> worth every penney.
>
> 73,
>
> Mickey N4MB
>
>
>
>
>
> On Thu, Jun 5, 2014 at 10:54 AM, W0MU Mike Fatchett <w0mu at w0mu.com
> <mailto:w0mu at w0mu.com>> wrote:
>
> Most of these gov't agencies are out for themselves. I have no
> idea why people think they are out to help us.
>
> Ask them to show you the laws and regulations that give them this
> power.
>
> Mike W0MU
>
> On 6/5/2014 6:51 AM, Steve Baughn wrote:
>
> Clay,
>
> Reference the building dept issue you might want to start by
> looking up your local ordinances that deal with building
> regulation and see what language they use. Some years back the
> municipality I worked for in Ohio got a hair about a tower I
> had that had been in the ground for a number of years. They
> attempted to call it an accessory structure and a number of
> other things. Bottom line is they had no language that
> pertained to towers to begin with and had never heard of
> PRB-1. They then settled for me paying for a permit after the
> fact. This created another issue as they had no language in
> their fee schedule for towers. This was also resolved. They
> then tried the same thing on another ham. My point is just
> because they tell you something it may pay to double check
> what they are saying and make sure their ordinances are in
> line with what they tell you. They basically had no idea what
> they were talking about but because they had gotten a
> complaint from some nut case they felt obligated to do
> something-even if it was wrong..Gl es 73,
>
> Steve, WD8NPL
>
> -----Original Message----- From: Clay Jackson
> Sent: Thursday, June 05, 2014 12:59 AM
> To: TowerTalk at contesting.com <mailto:TowerTalk at contesting.com>
> Subject: Re: [TowerTalk] Utility Pole as Beam Support
>
> Thanks to all who replied - tried looking for a BSP on wood
> poles and
> couldn't find the correct index. Any assistance there would be
> appreciated.
>
> I'm going to look into some sort of tilt-up "attached pole";
> but, failing
> that, will just do a rotor/mount and then spend the $$ renting
> a bucket
> truck when I need to do maintenance (tree service will rent me
> one with an
> operator for $75/hour). Main concern on the attached pole
> would be the
> load on the pulley/cable in a wind storm.
>
> Another big consideration will be permitting - need to call
> the building
> dept tomorrow. I know amateur antennas below 61' are exempt
> from zoning in
> my county, Benton, WA; but don't know about the BUILDING Dept.
> When I did
> my HyGain AV18HT (24' tower with a 24' mast); the Building
> Dept made me get
> a Washington PE licensed in THIS County to do a full-on
> engineered base
> plan, with a wet-stamp; cost well more than the antenna.
>
> Any suggestions on the "correct question" would also be
> appreciated - is it
> a "private utility plole" or an "antenna pole" or ??. We're
> having a big
> addition (that required a permit and multiple inspections) and
> I don't want
> to just put it up while there will be inspectors on-site.
>
> 73!
>
> Clay
> N7QNM
>
>
> -----Original Message-----
> From: Jim W7RY [mailto:w7ry at centurytel.net
> <mailto:w7ry at centurytel.net>]
> Sent: Tuesday, June 3, 2014 7:31 PM
> To: n7qnm-lists at nwlink.com <mailto:n7qnm-lists at nwlink.com>;
> TowerTalk at contesting.com <mailto:TowerTalk at contesting.com>;
> n0tt1 at juno.com <mailto:n0tt1 at juno.com>
> Subject: Re: [TowerTalk] Utility Pole as Beam Support
>
> BTW, there are Bell System Practices (call BPS's)
>
> BSPs And they are on Google.
>
>
> 73
> Jim W7RY
>
>
> -----Original Message-----
> From: n0tt1 at juno.com <mailto:n0tt1 at juno.com>
> Sent: Tuesday, June 03, 2014 7:01 PM
> To: n7qnm-lists at nwlink.com <mailto:n7qnm-lists at nwlink.com> ;
> TowerTalk at contesting.com <mailto:TowerTalk at contesting.com>
> Subject: Re: [TowerTalk] Utility Pole as Beam Support
>
> Lucky you to get such a pole for free!!! :D)
>
> Use NO concrete! The pole will shrink a little over time and
> there will be
> a crack to let water in and stay there, accelerating the
> rotting of your
> pole! Concrete will also prevent you from making below ground
> periodic
> inspections per the reference suggested below.
>
> Backfill with dirt or use some fine-graded sand that you
> "water in"
> to fill all the voids.
>
> BTW, there are Bell System Practices (call BPS's) that *may*
> be posted on
> the web that describes the proper install, loading, etc of
> wood poles.
> Google. If not, maybe a dedicated Telco ham just might have a
> copy in his
> personal library!
>
> I'd be tempted to rig the beam and mast with a "tilt-over"
> feature using a
> small winch to make it a no-climb antenna structure. A
> "cradle" would
> prevent side-to-side movement at the top.
>
> Now back to my workbench. :D)
>
> 73,
> Charlie, N0TT
>
> On Tue, 3 Jun 2014 15:15:05 -0700 "Clay Jackson"
> <n7qnm-lists at nwlink.com <mailto:n7qnm-lists at nwlink.com>>
> writes:
>
> I just "inherited" a 50' (out of the ground, 6' buried)
> utility pole
> (crew was taking it out and told me that if I'd drag it
> off the road,
> I could have
> it).
>
> I'm thinking about trying to find a rotator and tri-bander
> to put on
> top of it; but, having no experience with such a setup; I
> thought I'd
> seek some advice first.
>
> So, a few questions.
>
> I'm sure someone has done this before; would you be able
> to share
> your experiences?
>
> I have a friend who can weld anything from steel to
> aluminum and so I
> think
> we can fab up a mount for the rotor.
>
> Beyond that, thoughts would be appreciated on things like:
> Wind loading - how many sq ft (if any) is reasonable
> before I have to
> use guys (for my HyGain AV18HT the building dept made me
> engineer the
> base for 90K winds, WITH a "wet stamped" drawing)?
> Base - is a 6' hole filled with dirt "good enough" or do I
> need
> something more (if more, would a 6' hole with concrete be
> sufficient)?
>
> Thanks in advance!
>
> Clay
> N7QNM
>
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com <mailto:TowerTalk at contesting.com>
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com <mailto:TowerTalk at contesting.com>
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com <mailto:TowerTalk at contesting.com>
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com <mailto:TowerTalk at contesting.com>
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com <mailto:TowerTalk at contesting.com>
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
>
> --
> Mickey Baker, N4MB
> Fort Lauderdale, FL
> /“Tell me, and I will listen. Show me, and I will understand. Involve
> me, and I will learn.” /Teton Lakota, American Indian Saying.
More information about the TowerTalk
mailing list