[TowerTalk] FW: T2X problem

[Matt]

Suggest to check the wiring inside the rotor connected to terminal #1
(ground wire).  The potentiometer and the motor both use this common ground
connection to complete their circuits.   The brake circuit is also connected
to terminal #1 but via a direct connection as I recall.

Matt
KM5VI      

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
Willem Angenent via TowerTalk
Sent: Wednesday, May 07, 2014 3:25 PM
To: towertalk at contesting.com
Subject: [TowerTalk] T2X problem

I have a T2X I took from the tower because it was not working.

I have taken it apart and have the following problem:

The brake release normal.

No turning either way even not a buzz from the motor

Indicator is not working,  no reaction when I turn the wiper by hand.

Same way happened with a different cable and or control box.

 

I would go for it when you say the motor is "shot" but then what about the
indicator.

 

Any help is appreciated.

 

Thanks

 

Regards,

 

Will

K6ND

 

73

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk