[TowerTalk] Buring Bury-Flex

Drax Felton draxfelton at gmail.com
Fri May 9 16:20:53 EDT 2014


Consider Using the 4" drain pipe that has the holes all along it instead.  It's fairly inexpensive like $10 for 10 feet stick.  It's easier to pull coax through the larger width too plus moisture can go out the bottom.


Sent from my iPhone

> On May 9, 2014, at 3:00 PM, "Larry Banks" <larryb.w1dyj at verizon.net> wrote:
> 
> Hi all,
> 
> I am running Davis Bury-Flex out to a new 40M vertical in my back yard.  (Maine coast.)  As it is going across gravel walkways and near garden beds, and will not be that far below ground level, I am worried about it getting cut or nicked in the future from yard work, etc.
> 
> My plan is to use 1” sched 40 PVC conduit – the gray stuff – for protection.  (I will not be adding additional coax, wires, etc., ever, so this should be big enough.)  
> 
> My Concern:  the conduit will obviously become full of water – will freeze cycles and the expansion of ice inside the conduit compress and therefore damage the  Bury-Flex in any way? 
> 
> 73 -- Larry -- W1DYJ
> 
> 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


More information about the TowerTalk mailing list