[TowerTalk] FW: FW: Beverage Layout Problem

[Matt]

Thanks Pat - just wanted to confirm that I used the wrong term - NOT
autotransformer, but isolation transformer....

Matt

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
Patrick Greenlee
Sent: Wednesday, May 14, 2014 8:18 AM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] FW: Beverage Layout Problem


On 5/13/2014 9:57 PM, Matt wrote:
>   IMHO, best to wind Beverage baluns as autotransformers (input 
> windings separate from output windings)

Google autotransformer and see something like: /Auto Transformer/is a kind
of electrical transformer, where primary and secondary shares same common
single winding.

That is, the windings are  N O T  isolated. An isolation transformer has
independent windings.



Otherwise very good advice!


73,

Patrick NJ5G

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk