[TowerTalk] Cordless solder irons

[AB2E Darrell]

Just found this one at Harbor Freight for $8, might be worth checking out.... 2000F temp, does not have watt rating though.
http://www.harborfreight.com/micro-torch-42099-html.html 

73  Darrell AB2E

> From: ab2e at hotmail.com
> To: jim.thom at telus.net; towertalk at contesting.com
> Date: Wed, 19 Nov 2014 21:14:46 -0500
> Subject: Re: [TowerTalk] Cordless solder irons
> 
> I had a hand-held butane soldering iron that worked well out of the house.
> A quick search on eBay shows both butane and also some battery powered soldering irons.
> 73 Darrell AB2E
> 
> 
> > From: jim.thom at telus.net
> > To: towertalk at contesting.com
> > Date: Wed, 19 Nov 2014 06:43:55 -0800
> > Subject: [TowerTalk] Cordless solder irons
> > 
> > Date: Tue, 18 Nov 2014 19:10:23 -0800
> > From: "Don " <w7wll at arrl.net>
> > To: "Towertalk" <towertalk at contesting.com>
> > Subject: Re: [TowerTalk] Some advice about crimp ;type coax connectors
> > 
> > Which brings a question to mind. Why is there not available for sale a 
> > decent battery powered soldering iron. Sure would be nice when in the air 
> > not to be tied to an AC power cord. I did a search (probably not very deep) 
> > and found some battery powered irons but nothing that would deal with a few 
> > UHF connectors out and away from the 'house'. A friend from Australia who 
> > was in the 2-way radio business had a couple he brought when he immigrated 
> > from Oz but I've been unable to find that they are made anymore.
> > 
> > Anyone have information on such a tool for use whilst up in the air??
> > 
> > Don W7WLL
> > 
> > ##  from 1979-1989...in the telco I worked in 400 miles north of here, we had 
> > a cordless, rechargeable soldering iron.  Think it was a weller...was orange in colour. 
> > Worked superb.... but never tried it outside.. only inside.  They were real small, light weight,
> > fit in your pocket. A lot smaller than a normal pencil iron.    I believe they would work fine
> > outside.  A comment here. Silver plated PL-259s  are a LOT easier to solder vs
> > the nickel plated types.   I gave up on amphenol nickel plated /teflon PL-259s.
> > 
> > ##  I picked up 2  dozen van gordon silver /teflon  PL-259 years ago.  They solder
> > real easy. 
> > 
> > ##  Id check out cordless types 1st.   You can probably get em with spare, quick swap out
> > lithium batteries no doubt.   The propane /butane types would also work, but are more cumbersome
> > heavy etc... esp up a tower.   In good wx... Id run an extension cord up the tower..and use my
> > american beauty 100 w iron, with the .375 inch chisel tip.   We used dozens of those irons in the telco,
> > back when a lot of wiring was still being soldered.   I have a few of them.   You can also get the bigger
> > ones, like 150w and up to 600 watt.   The 100 w version... used to solder a silver plated coax connector,
> > is super fast.   The bigger ones like the 500-600w are used for plumbing..where a blow torch cant be used.
> > The bigger ones work great for stuff like tubing type tank coils, large wide cu strap, etc. 
> > 
> > Jim   VE7RF  
> > _______________________________________________
> > 
> > 
> > 
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>  		 	   		  
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk