[TowerTalk] simple station design

[Steve Maki]

I think he may be looking for an app that will do a station block 
diagram. In that case something like Smartdraw works pretty well.

-Steve K8LX

On 10/17/2014 7:00 AM, David Robbins wrote:
> For my so2r position I have gone to a touch screen with greenheron software
> controlling a greenheron wireless base and remote modules for all the
> switches(7) and greenheron rotors(9) for all the rotors.  I switched to
> arraysolutions band decoders and filters, but am still using the old sixpak
> switch with an rcs-8v add-on for warc band selection.  Just one specific
> recommendation, get a BIG touch screen, mine is a planar 22" one, this lets
> you make the buttons big enough to hit easily.  I tried a couple tablets and
> was not happy with the ease of reading or use.
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt at arrl.net
> web: http://wiki.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>
>
> -----Original Message-----
> From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Wayne
> Kline
> Sent: Friday, October 17, 2014 02:39
> To: towertalk at contesting.com
> Subject: [TowerTalk] simple station design
>
>    Hi Fellow  TT'ers.
>
>   Rebuilding operating  position  and making  all modular control lines.  7
> rotors, three stack match, two beverage switched   not to mention band
> decoders BP filters
> SO  My  old Station Bible is Fubar   it's been 23 years I am hoping I can
> find something other them  my  Hieroglyphics drawings and pencil lines...
>
>
> Wayne W3EA