[TowerTalk] TowerTalk] Modeling a ground plane

john at kk9a.com john at kk9a.com
Wed Sep 10 12:11:33 EDT 2014


How accurately does EZNEC NEC-2 model wires close to the ground?

John KK9A


To:	Towertalk <towertalk at contesting.com>
Subject:	[TowerTalk] Modeling a ground plane
From:	Bill Turner <dezrat at outlook.com>
Date:	Wed, 10 Sep 2014 08:11:39 -0700

I am modeling a full size ground plane with four elevated radials for
40 meters using EZNEC v. 3.0. I have it six feet above ground.

I noticed that changing the length of the radials has much less effect
on the resonant point than changing the vertical element.

For example, on 40 meters, changing the vertical element by one foot
moves the resonant frequency by about 200 kHz, but changing all four
radials by one foot moves the resonant frequency much less, only about
20 kHz or so.

I'm curious why this is. I would have thought the effect would be the
same.

All comments appreciated.

73, Bill W6WRT



More information about the TowerTalk mailing list