[TowerTalk] Zerk fitting for MA-40

[john at kk9a.com]

The removal tools is called an E-Z Out.

John KK9A


To:	Kurt at KuhlRoad.net, towertalk at contesting.com
Subject:	Re: [TowerTalk] Zerk fitting for MA-40
From:	TexasRF--- via TowerTalk <towertalk at contesting.com>
Reply-to:	TexasRF at aol.com
Date:	Fri, 10 Apr 2015 12:06:18 -0400

Kurt, most any automotive supply has replacement Zerk fittings. The larger
issue will be removal of the remains of the old fitting. The same
automotive  supply should also have tools to remove broken screws/bolts to do
that.

73,
Gerald K5GW



In a message dated 4/10/2015 10:59:46 A.M. Central Daylight Time,
Kurt at KuhlRoad.net writes:

I have a  US Tower MA-40 with the rotator base.  The last time I greased
the  bearing, the Zerk fitting broke when I was removing the grease gun.
Does anybody have an idea of what I should replace it with?  I got
crickets from US  Tower.

-Kurt
KR2C