[TowerTalk] Source for 3x12 / 2 x 18 Rotor Cable

[Richard Thorne]

I have a prop pitch coming my way which will require 3 x 12g for the 
motor and 2 x 18 for the pulse signal.  The run from the shack to the 
tower will be 200' or a bit less.

The current plan is to use a 2x12, 6x16 rotor cable by combining 4 of 
the 16g for the 3rd 12g leg and the remaining 2 16g lines for the pulse 
signal.  Or use 3x12g outdoor house wiring with some sort of 2x18g or 
2x16g for the pulse switch.

Both solutions above would work just fine.  It would be nice, however, 
if I could find a cable that has 3x12g / 2x18g.

If anyone knows of a source for 3x12g / 2x18g please let me know.

Thanks

Rich - N5ZC