[TowerTalk] Source for 3x12 / 2 x 18 Rotor Cable

[Wayne Kline]

 When I ran a Prop Pitch on my 40/10 meter tower  122'  and 200' from the shack
 
I use #10 UF 2 conductor + ground....    junction @ the shack outside wall BOX straight to the terminial
 
strip epoxied on the bottom of the PP's mounting plate.
 
For  direction/control I used 4X16 ga  found at a local scrap yard.
 
Wayne W3EA  
 

> I have a prop pitch coming my way which will require 3 x 12g for the 
> motor and 2 x 18 for the pulse signal.  The run from the shack to the 
> tower will be 200' or a bit less.
> 
> The current plan is to use a 2x12, 6x16 rotor cable by combining 4 of 
> the 16g for the 3rd 12g leg and the remaining 2 16g lines for the pulse 
> signal.  Or use 3x12g outdoor house wiring with some sort of 2x18g or 
> 2x16g for the pulse switch.
> 
> Both solutions above would work just fine.  It would be nice, however, 
> if I could find a cable that has 3x12g / 2x18g.
> 
> If anyone knows of a source for 3x12g / 2x18g please let me know.
> 
> Thanks
> 
> Rich - N5ZC
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk