[TowerTalk] Can´t add egg insulator...

[Douglas Ruz (CO8DM)]

Glad to hear your experience David...by the way, 1/4" solid steel wire is
available here...it is cheaper than 1/4" EHS galvanized wire and sometimes
galvanized is not available...David, how do you fix the solid steel
wire???...using clamps or any other technic ???...any tips are welcome.

I have "TONS" of egg insulators, maybe if i "switch" to 1/4" solid steel
wire I can add egg insulators.

I will solve one problem but i will introduce another...corrosion will
attack the solid steel wire faster than galvanized...Imperfect WORLD...hi,
hi...

Non conductive materials like Philistran or Dacron are NOT AVAILABLE here.

Thanks,

73....Douglas, CO8DM

"No creo que haya alguna emoción más intensa para un inventor que ver alguna
de sus creaciones funcionando. Esa emoción hace que uno se olvide de comer,
de dormir, de todo." - Nikola Tesla
----- Original Message ----- 
From: "David Robbins" <k1ttt at arrl.net>
To: "reflector -tower" <towertalk at contesting.com>
Sent: Sunday, December 13, 2015 10:52 AM
Subject: Re: [TowerTalk] Can´t add egg insulator...


> It isn't that important to use non-resonant guys.  I have 4 guyed towers
> with solid steel wires and stacks of yagis for 10m through 40m and
> everything works just as it should.
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt at arrl.net
> web: http://wiki.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373
>
>
>
> -----Original Message-----
> From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of J.
> Hunt via TowerTalk
> Sent: Sunday, December 13, 2015 15:33
> To: towertalk at contesting.com; Douglas Ruz (CO8DM)
> Subject: Re: [TowerTalk] Can´t add egg insulator...
>
> It is VERY important to use non-resonant steel guy cables on your
> frequency(s) of operation.
>
> A resonant guy cable will have adverse radiation patterns during RX and
> TX.
>
> A good example... my guyed tower was constructed years prior the 60m band
> was introduced.
> My tower is guyed at three levels.  Numerous preformed grips and egg
> insulators were used.
>
> I rigged up a 60m dipole antenna. During the tuning process, as I neared
> the resonant frequency, the SWR suddenly sky-rocketed.
> Reason - two of my guy cables were resonant within the 60m band.  I
> scrapped the 60m antenna.
>
>
> Thanks n 73,
> James
> ki5dq
>
> --------------------------------------------
> On Sun, 12/13/15, Douglas Ruz (CO8DM) <co8dm at frcuba.co.cu> wrote:
>
> Subject: [TowerTalk] Can´t add egg insulator...
> To: towertalk at contesting.com
> Date: Sunday, December 13, 2015, 8:47 AM
>
> Hi guys,
>
> I read about resonant guy wires.
>
> Unfortunately i can´t add egg insulator to build non resonant guy wires. I
> don´t have enought clamps or guy grip (preform) to install egg insulators.
>
> Maybe someone know any other solution.
>
> I have been modeling my tower on MMANA and i don´t see any interaction
> with my HD spiderbeam for 10, 15 and 20m.
>
> My guy wires lengths are: 20 ft (the 1st level ) and 30 ft (the 2nd
> level).
>
> any tips are welcome.
>
> 73....Douglas, CO8DM
>
> "No creo que haya alguna emoción más intensa para un inventor que ver
> alguna de sus creaciones funcionando. Esa emoción hace que uno se olvide
> de comer, de dormir, de todo." - Nikola Tesla
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>