[TowerTalk] Tilting Down a US Tower HDX-589

[Bryan Swadener via TowerTalk]

I have a TX472. I just put some slack into the tilt cable, and give the tower a push.
vy 73,Bryan WA7PRC
 
    Date: Mon, 23 Feb 2015 17:35:36 -0600
Subject: [TowerTalk] Tilting Down a US Tower HDX-589

I have a motorized raising fixture for my US Tower HDX-589MDPL , and just last week I successfully raised it to the vertical position for the first time.  Everything went very smoothly and effortlessly with the 1 HP motor and 50:1 ratio Hub City worm gear drive. Raising takes about 4 minutes. I haven't installed my antennas, rotator etc. yet. 

My question is what is the best way to get the tower moving from the vertical position when I want to lower it to horizontal again? It weighs about 2,500 lbs and is sitting very plumb on its base. Of course once it's leaned a bit,  the motorized fixture will easily lower it. There's no way you can just push it even with some slack in the aircraft cable. 

I suspect someone on the list has a simple solution. 

J D Lambright