[TowerTalk] Mosley Antenna Question
Jim Thomson
jim.thom at telus.net
Thu Feb 26 22:27:40 EST 2015
Date: Thu, 26 Feb 2015 16:47:30 +0000 (UTC)
From: Drax Felton <draxfelton at gmail.com>
To: Richard Solomon <dickw1ksz at gmail.com>, <towertalk at contesting.com>
Subject: Re: [TowerTalk] Mosley Antenna Question
Could it be that LMR400 wasn't available or too expensive way back when the Mosley manual was written??
## LMR 400 wont flex, it has a 10 ga solid center conductor. LMR-400UF would work. As long as its
50 ohms, and flexible, it will work. For folks with rotary towers, rigid coax can be used from each yagi
to a remote switch box. The only coax that needs to flex is the loop at the base of the tower. Event hat
short piece can be spliced back into more rigid stuff..and off to the station 100 ft away.
Jim VER7RF
More information about the TowerTalk
mailing list