[TowerTalk] Fw: w7ekb & ground rods

[john at kk9a.com]

Ground rod drivers that fit demolition hammers and jack hammers are also
commercially available for around $50-$60.

John KK9A


To:	towertalk at contesting.com
Subject:	Re: [TowerTalk] Fw: w7ekb & ground rods
From:	Patrick Greenlee <patrick_g at windstream.net>
Date:	Tue, 20 Jan 2015 09:11:54 -0600



I read the English gentleman's reference and his is good stuff but in my
case I am using a demo hammer not a drill. No rotary motion just hammer
blows and no drill type chuck so the referenced adapter is not useable. It
is easy to make an adapter by using a chisel made for the demo hammer,
cutting off the chisel tip and welding on a piece of conduit or pipe to
form a cup so the "business end" of the tool does not slip off the ground
(earth) rod.

Patrick