[TowerTalk] Rohn 45 to Rohn 25 adapter

[Stan Stockton]

Herb,

Assuming the tower is guyed, seems to me the easiest thing to do would be to use a short flat top section on the 45G and a flat base plate for the 25G and just bolt them together with a few bolts.

73...Stan, K5GO

Sent from my iPad

> On Jan 27, 2015, at 10:17 AM, Herbert Schoenbohm <herbert.schoenbohm at gmail.com> wrote:
> 
> One of my towers starts out with 40 feet of Rohn 45 and I would like to continue with another 20 feet with Rohn 25. (I have the proper top section for Rohn 25 and rotor plate)  Currently I use large clamps on each leg with the Rohn 25 nestled a few feet inside the Rohn 45.  My question: Is there a commercially made reduction section available anywhere that can do this?  I see one in the Rohn catalog for 55 to 45 but not 45 to 25.  Please let me know if such a device is reduction section exists.
> 
> 
> Herb Schoenbohm, KV4FZ
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk