[TowerTalk] Steppir BI-directional mode

Doug Turnbull turnbull at net1.ie
Sat Jan 31 13:15:14 EST 2015


Dear OMs,
     If I am not mistaken the SteppIR 3 element has a bidirectional mode and
it does have gain in both directions.   There is no need to retract director
and reflector.  I use all three modes forward, reverse and bidirectional in
contests regularly and find it most helpful.   My SteppIR is the 4 element
model with trombone for 30/40.

               73 Doug EI2CN

                 

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
john at kk9a.com
Sent: 31 January 2015 17:28
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Steppir BI-directional mode

Why not retract the reflector and director and use it as a dipole?

John KK9A

To:	<towertalk at contesting.com>
Subject:	[TowerTalk] Steppir BI-directional mode
From:	"Jim Thomson" <jim.thom at telus.net>
Date:	Sat, 31 Jan 2015 05:27:28 -0800

If you configure the 3 el steppir yagi, so it has a DIR on each end of the
boom,
and the DE in the middle,  I assume its bi-directional.   But does it also
have 
BI-directional gain ??     Like 4 db gain in both directions ?   I cant find
my 
copy of YO,
so I have no way to model this.   If it does have bi-directional gain, I can

see where
it would come in handy, under certain conditions. 

Jim  VE7RF

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



More information about the TowerTalk mailing list