[TowerTalk] Tower Build

[Bryan Swadener]

My solution works for me, and was VERY easy and inexpensive to fabricate and use.
Since that is the case, I'm not going to change anything.

vy 73 es gl,
Bryan WA7PRC
http://www.tinyurl.com/wa7prc-tower

>Date: Fri, 3 Jul 2015 17:48:58 -0400
>From: Mike Reublin NF4L
>To: towertalk reflector
>Subject: Re: [TowerTalk] Tower Build
>
>Why do you say the tilt-plate wouldn't give you access to the vertical? The Yagi's elements would be parallel to the ground, at whatever height you chose to stop the descent, altho horizontal or below horizontal puts a lot of extra stress on the raising gear. Even a few degrees above is significant. I stop mine when the rotor is about eye level. I'm 5'10".
>
>73, Mike NF4L